Follow Us :  
 
Manufacturer and Supplier of all types of Precise Brass Parts
Products
Specifications
 
Material
  • Free Cutting Brass IS 319 Type (I) or
  • Free Cutting Brass as per BS 249 Type (I) or
  • Brass to BS 2874 / 2872
  • High Grade Free Cutting Brass.
  • Copper
  • Gun Metal
  • Bronze
  • Mild, Spring & Stainless Steel
  • Nickel Based Alloys
  • Bought in turned parts & Silver Contacts for assembly
  • Silver Contact Welded Material
  • Any Special Brass Material Composition as per customers requirement
European European U.K. U.S.A. Sweden
Material Metal UNS S.S. Material
Design B.S. Material Material Codes
(DIN) Codes Codes Codes  
CuZn36Pb2 As CW602N CZ132 C35330 SS-5170
CuZn36Pb3 CW603N CZ124 C36000 SS-5112
CuZn37Pb2 CW606N CZ131 C35300 SS-5114
CuZn38Pb2 CW608N CZ128 C38500 SS-5122
CuZn39Pb3 CW614N CZ121 C37710 SS-5150
CuZn40Pb2 CW617N CZ122   SS-5163
CuZn39Pb2 CW612N CZ128   SS-5168
CuZn38Pb1.50 CW608N CZ128   SS-5243
        SS-5246
Designs
  • Round
  • Round Knurled
  • Polygonal
  • Squares
  • Any special cross-sections and profiles
Threads
  • ISO Metric (MM Threads)
  • BA Threads
  • BSW Threads (Inches)
  • BSP, BSPT, NPT Threads
  • Any threads as per custom design.
Length / Size

Begins from M2 or equivalent threads and up to any size as per custom design or requirement.
Finish & Coating

Kailash Brass Industries' integrated finishing capabilities allow us to handle this critical aspect of production seamlessly. This eliminates additional shipping and handling of parts, as well as typical conflicts between the substrate producer and finisher.
  • Natural Finish/Nickel / Chrome/ Tin / Silver / Gold / Brass Color / Yellow Passivated
Special Features
  • Threads as per International Go & Not Go Standards.
  • Deep Groove for maximum Pull out Resistance.
  • Inner Diameter (I/D) after Threads with very close tolerance to prevent unnecessary flush to enter into the inserts.
Knurling Available
  • Diamond Knurling 
  • Straight Knurling
  • Unidirectional Knurling
 
Standard specifications
Material used for our products follows the specifications of the following standards and also according to the applications or customers' requirements.
  • IS: 319, type-1
  • IS: 319, type-1, 1/2H.
  • BS 249 Type-1
  • Brass to BS 2874 / 2872
  • CuZn39Pb2-F43, DIN 17672
  • CuZn42Pb2, IS 6912
 
General tolerances follow the specifications of the following standards
  • ISO 2768-m. or APES 98025